Loading... Please wait...
  • Gift Certificates
  • My Account 

Currency Displayed in

​ Do you Raspberry Pi?

Posted


For the rest of May 2014 we will double any purchase of Raspberry Pi. You order 2, we'll send you 4, etc.

Schmartboard has made prototyping through hole and surface mount parts on your Raspberry Pi project not only possible, but easy and Schmarter. While Schmartboard is not the first to offer Raspberry Pi prototyping add-on boards, we are the first to offer many features laid out to focus on convenience and reducing clutter. We are also the only company who can utilize our "EZ" soldering technology to assure fast, easy and flawless surface mount soldering for virtually anyone.

Here are some of the features of our base through hole add-on board:

  • Schmartboard's Signature offset through hole grid which expands part placement options
  • An extra row of holes for easy access to Raspberry Pi's General I/O signals
  • Rows of Power and Ground Strips for easy and flexible power-up and circuit grounding
  • Pre Routed traces to minimize the use of wire jumpers
  • A slot for the video cable to keep the circuit clean and unencumbered
  • Quantity two 2x13 Headers with enough clearance to cleanly and safely stack onto the Raspberry Pi board. (These headers are custom made for Schmartboard. The pins are the same diameter as standard .1" headers for easy and snug jumper connection)
  • Circuits for 4 level shifters to more simply add devices regardless of signal values
  • A marked area where the Raspberry PI USB and Ethernet Connectors are located to avoid conflicts
  • Free 170 Tie Breadboard


Buy one of our surface mount bundles or add our SMT to DIP adapters to support the following (more being added all the time).

  • SC70 and SOT 70
  • SOIC with .5, .635, .65 and 1.27mm Pitchs
  • QFP, QFN and DFN with Pitches of .5mm



 

What's News

newsletter

Copyright 2024 Schmartboard, Inc.. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter