2mm to 0.1 Inch Header Converter (923-0001-01)

Qty. 10 2mm to 0.1 Inch Header Converter

2mm header posts are not easy to work with.  You can't find jumpers with a snug 2mm receptacle.  Until now you were stuck with cheap loose fitting 2mm receptacles or expensive custom solutions.  The Schmartboard 2mm to 0.1" converter allows you to use standard 0.1 inch jumpers with a 2mm post.  Simply slip the 2mm side onto the 2mm post and connect a standard .1 inch male header to the other end of the converter.  Our receptacles are tighter than most***.  This is important because you certainly do not want to have a jumper wire as the culprit in a problematic circuit.  We made these due to numerous customer requests for a better solution. 

Brochure

***The 2mm side is not as snug as the 0.1" side  due to the fact that there is less surface area to connect to