SchmartPatch to the Rescue

SchmartBoard has just released a new product family that makes it possible to add or replace surface mount components on a PCB or other substrate. We proudly introduce SchmartPatch.

SchmartPatch allows one to add surface mount components to a substrate such as a Printed Circuit Board or replace components. SchmartPatch boards each support multiple pre-defined components and allow you to cut off a pad from the SchmartPatch (using scissors or a blade), stick the pad on to the surface of the substrate (utilizing adhesive already on the back of the SchmartPatch) and then solder a component onto the SchmartPatch. The component pads are routed to other pads that allow one to solder jumper wires from the SchmartPatch to make the electrical connection to the substrate.

SchmartBoard sees a few scenarios that the product can be utilized for. One situation may be to replace ruined pads in a circuit board repair in the field. Another example might be to add a component to a run of PCBs to resolve issue immediately rather than waiting for new PCBs to arrive. They can also be used as part of one’s prototyping or project development.

Schmartboard has released 6 types of SchmartPatch boards. Each comes in packs of four for a retail price of $15.00. Volume purchases can be arranged with Schmartboard directly for larger rework needs.

Cut Off a Pad From the SchmartPatch

Expose the Adhesive Backing

Place SchmartPatch on PCB and Solder Component

Solder Jumper Wires to Connect to PCB

The SchmartPatch products are as follows:

203-0001-01SchmartPatch for 0603, 0805, SOD123, SOD323 and SOD523

203-0002-01SchmartPatch for 1008, 1206, CASE-A and SOD80

203-0003-01SchmartPatch for SOT23-6

203-0004-01SchmartPatch for 1210, 1608, 2010, 2512 and CASE-B/C/D/E

203-0005-01SchmartPatch for SOIC-8

203-0006-01SchmartPatch for SC70-6

Schmartboard plans to add more versions of SchmartPatch in the near future.